The portable pumps for these high pressure skids are designed with diaphragm or self-priming piston pumps. These pumps are mounted on welded frames, protected by high quality epoxy coatings. Units can include hose reels, electric or manual, with high pressure fog/stream nozzles. Pumps can also include high pressure foam proportioning systems. These proportioners insure consistent injection of foam concentrates throughout a wide range of percentages. The units are also available with water tanks (polypropylene) from 50 to 500 gallons. With 11 gpm @ 1450 P.S.I., these skid units provide outstanding protection with minimal water usage.
Complete with 200 gallon water tank and 8 gallons of foam

The portable pumps for these high pressure skids are designed with diaphragm or self-priming piston pumps. These pumps are mounted on welded frames, protected by high quality epoxy coatings. Units can include hose reels, electric or manual, with high pressure fog/stream nozzles. Pumps can also include high pressure foam proportioning systems. These proportioners insure consistent injection of foam concentrates throughout a wide range of percentages. The units are also available with water tanks (polypropylene) from 50 to 500 gallons. With 11 gpm @ 1450 P.S.I., these skid units provide outstanding protection with minimal water usage.

This high volume Honda powered floating pump is the most efficient on the market. It gives you the highest volume in its range.

This Honda pump is the most reliable on the market. It is the ideal tool to fill your fire truck, supply your pump truck, or carry water over a long distance. Engine and pump are mounted on a protective frame made of steel with shock absorbers and folding handles.

This light weight Honda powered pump is the most powerful on the market in its category. You get the highest volume in its range. Engine and pump are mounted on a protective frame made of steel with shock absorbers and folding handles.

A tank, a live hose reel and/or crosslay, a portable fire pump and/or a compressed air foam system (CAFS), with an engine: these can be combined into a single one-piece assembly that can be slipped onto a truck bed, trailer, or into a body and used for flowing water and/or foam on a structural fire, car fire or wildfire. The most common wildland and urban interface fire engines in North America combine a small truck with a water tank and a high performance portable pump. The sizes vary from 50 gallons for an ATV, up to 500 gallons for full-size trucks.

A tank, a live hose reel and/or crosslay, a portable fire pump and/or a compressed air foam system (CAFS), with an engine: these can be combined into a single one-piece assembly that can be slipped onto a truck bed, trailer, or into a body and used for flowing water and/or foam on a structural fire, car fire or wildfire. The most common wildland and urban interface fire engines in North America combine a small truck with a water tank and a high performance portable pump. The sizes vary from 50 gallons for an ATV, up to 500 gallons for full-size trucks.

A tank, a live hose reel and/or crosslay, a portable fire pump and/or a compressed air foam system (CAFS), with an engine: these can be combined into a single one-piece assembly that can be slipped onto a truck bed, trailer, or into a body and used for flowing water and/or foam on a structural fire, car fire or wildfire. The most common wildland and urban interface fire engines in North America combine a small truck with a water tank and a high performance portable pump. The sizes vary from 50 gallons for an ATV, up to 500 gallons for full-size trucks.

A tank, a live hose reel, crosslay, foam system(s), and or patient transport, with a fire pump that can be combined into a single one-piece assembly slipped onto a small truck, ATV, trailer or boat. This unit can be used for flowing water and or foam on a structural fire, car fire, marine fire, wildfire, and confined space fires. This unit is very effective in, parking garages, commercial and industrial buildings, stadiums, arenas, and parking lots. The combination of fire suppression and patient transport capabilities, packs a lot of value into this all poly-unit. It's light and ready to fight.

Two men can unload the Fol-Da-Tank from the truck and set up in less than 30 seconds. While the pumper empties the Fol-Da-Tank a tanker can be bringing more water. Fol-Da-Tank has proved to be the practical answer as an extra water supply for rural areas where water pressure is low or as a back-up facility for municipal fire departments. Fol-Da-Tanks come standard with grab handles and hinge protectors pinch free design (U.S. patent #7,938,291, Canadian patent #2624553) to help firefighters when folding the tank. Grab handles can be placed on the bottom side walls or floor of the liner to eliminate any snagging of Low-Level strainers or hose. Fol-Da-Tanks are a great resource for oil spill containment and oil spill clean up.

Small Size, High-Tech Features
21 lbs. portable fire pump equipped with a 1-stage centrifugal pump and a 4-stroke Honda engine. A powerful and balanced combination with a performance of up to 100 psi and a maximum flow of up to 69 GPM.

High Flow at Medium Pressures
A range of fire pumps designed to offer excellent medium pressure range with high flow capacity. The BH2 fire pump is equipped with a 2-stage centrifugal pump and can be combined with 4 different 4-stroke gasoline engines, reaching a maximum pressure of 248 psi and a maximum flow of 118 GPM.

High Performance and Power
The BH4 pump was designed for the best power-to-weight ratio in the industry. It comes equipped with a 4-stage centrifugal pump that can be combined with 3 different 4-stroke gasoline motors for up to 418 psi of maximum pressure and 105 GPM of maximum flow.

Light and Powerful
Robust and powerful portable pump equipped with a 4-stage centrifugal pump and a 2-stroke 125 cc motor. This combination provides immense flow and pressure at great distances and elevations.