You are here: Home > PRODUCTS > FIRE SUPPRESSION > FOAM
Sort By:
Page of 1
ANGUS HI-COMBAT CLASS A FOAM ANGUS HI-COMBAT CLASS A FOAM

Environmentally responsible Hi-Combat A Class A foam concentrate, is a unique new formulation providing unmatched firefighting performance and flexibility. HiCombat A is specially designed for use in Class A/B foam systems and is excellent for Compressed Air Foam Systems (CAFS). This environmentally responsible formulation does not contain reportable components under SARA Title III, Section 313 of 40 CFR-372, or CERCLA.

ANGUS NIAGARA 1 X 3 MULTI-PURPOSE FOAM ANGUS NIAGARA 1 X 3 MULTI-PURPOSE FOAM

Niagara from Angus Fire is the newest and most versatile addition to the Angus family of foams. It can be used on all Class A and B fires through all types of proportioning and application equipment. Niagara is truly the ultimate choice in foam for today's fire service. Niagara 1 X 3 is a superior quality Alcohol Resistant Film Forming Fluoroprotein (AR-FFFP) fire fighting foam concentrate for use at 1% on hydrocarbons and 3% on polar solvent liquid fires.

ANGUS SPITFIRE 0.1 - 1% CLASS A FOAM ANGUS SPITFIRE 0.1 - 1% CLASS A FOAM

SPITFIRE is a high quality synthetic fire fighting foam concentrate designed to increase the effectiveness of water when mixed at a ratio between 0.1 and 1%. SPITFIRE is non-corrosive to equipment and can be premixed directly in water tanks. In addition, it is suitable for use in all proportioning systems, from in-line inductors to foam injection systems.SPITFIRE is designed for use on all Class A applications such as Structural, Wildland, Grass Fires, Smoldering Fires and Vehicle Fires. SPITFIRE is produced to rigorous quality control standards to ensure consistent fire performance and excellent product reliability.

ANGUS TRIDOL C 3% AFFF FOAM ANGUS TRIDOL C 3% AFFF FOAM

Tridol C 3% is a cost-effective synthetic Aqueous Film-Forming Foam (AFFF) concentrate for extinguishing and securing flammable hydrocarbon liquid fires. Tridol C 3% is a unique combination of hydrocarbon and fluorochemical surface active agents. It produces a vaporsealing aqueous film that spreads rapidly over the fuel surface to provide rapid control and extinguishment.

ANGUS TRIDOL C 6% AFFF FOAM ANGUS TRIDOL C 6% AFFF FOAM

Tridol C 6% is a cost-effective synthetic Aqueous Film-Forming Foam (AFFF) concentrate for extinguishing and securing flammable hydrocarbon liquid fires. Tridol C 6% is a unique combination of hydrocarbon and fluorochemical surface active agents. It produces a vaporsealing aqueous film that spreads rapidly over the fuel surface to provide rapid control and extinguishment.

TFT - FOAM EDUCTOR - 95 GPM TFT - FOAM EDUCTOR - 95 GPM

Foam Eductor - 95 GPM - 1.5" Female X 1.5" Male with 36" Hose. Metering Settings - .25% .5% 1% 3% 6%

TFT - PRO/PAK 1" PORTABLE FOAM SYSTEM TFT - PRO/PAK 1" PORTABLE FOAM SYSTEM

TFT's PRO/pak foam injection and application system is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 1"(2.5 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. Flow is controlled by a twist grip valve that also functions as a carrying handle. With three different quick connect nozzles included, the PRO/pak system is capable of producing low or medium expansion finished foam, while operating at low inlet pressures.

TFT - PRO/PAK 1.5" PORTABLE FOAM SYSTEM TFT - PRO/PAK 1.5" PORTABLE FOAM SYSTEM

TFT's PRO/pak foam injection and application system with angled coupling is the ideal choice for rapid vapor suppression with any Class A, AFFF or Alcohol Resistant foam concentrate. Everything you need is contained in one package that attaches to the end of your 1.5" (3.8 cm) fire hose. The PRO/pak has a high impact 2.5 gallon (9.5 l) foam reservoir with a built-in eductor that can be set to the ratio of foam or wetting agents being used. A large, easy-open fill port has an indicator to show the type of liquid in the tank. Flow is controlled by a twist grip valve that also functions as a carrying handle. With three different quick connect nozzles included, the PRO/pak system is capable of producing low or medium expansion finished foam, while operating at low inlet pressures.