You are here: Home > SERVICES > FIRE ALARM SYSTEMS > EMERGENCY LIGHTING

EMERGENCY LIGHTING

ABC offers a full line of products for your Emergency Lighting needs:

Commercial
Ready-Lite offers attractive, competitively-priced designer emergency lighting solutions with a variety of modern, elegant, space-saving options to complement most any design and architectural requirements.

Institutional

Ready-Lite offers a full range of energy-saving, high-performance emergency lighting solutions for facilities such as schools and hospitals at competitive prices. Ready-Lite products are ideal for both retrofits and new installations.

Hospitality

When a high-performance emergency lighting solution is needed, the many designer and economical options offered by Ready-Lite can meet the needs of high-traffic, high-visibility areas and places requiring tamper-proof units.

Industrial

In hazardous areas such as warehouses, and manufacturing plants, and in extreme heat locations such as foundries and steel mills, Ready-Lite emergency lighting solutions meet the most stringent requirements, including NEMA-4X applications.


READY-LITE CX2000 SERIES DIE-CAST ALUMINUM EXIT SIGNS

The Ready-Lite CX2000 Series LED Exit Signs operate with universal two-wire AC input voltage and universal two-wire DC input voltage. The faceplate(s) and the back plate snap together and are made of Die-Cast aluminum. The light source is light emitting diodes, that provide illumination in normal and emergency operation and are mounted inside the exit on a plastic frame/reflector. An LED-sensitive diffuser is mounted behind the legend to provide the 6 high by 3/4 stroke letters with even illumination. The Self-powered model stays illuminated during emergency operation for at least 90 minutes (red) and at least 60 minutes (green) upon AC failure. The Self-powered model includes self-testing and self-diagnostic functions.

READY-LITE ESCAPE C29 SERIES THERMOPLASTIC BATTERY UNIT LIGHTING SYSTEM

The Ready-Lite Escape C29 Series battery unit emergency lighting system consistS of fully automatic equipment with two MR16 glare-free halogen heads. Each unit contains a fully automatic, solid state charger with test switch and AC on pilot lights, and a sealed transfer circuit and low voltage disconnect circuit. The battery is 6V with a capacity of 29W for 30 minutes.

READY-LITE RAC SERIES EXTRUDED ALUMINUM PICTOGRAM EXIT COMBO UNIT

The Ready-Lite RAC Series combination emergency light battery unit and the pictogram Exit Signs are suitable for universal mounting: wall, end, or ceiling. The unit includes a power pack made of steel and a legend housing including a one-piece extruded aluminum frame. The legend housing has a maximum depth of 2-1/2. The face plate(s) are made of extruded aluminum and incorporate a protective clear polycarbonate panel. Each face plate comes standard with two legend films for pictogram and direction selection. The light source is white light-emitting diodes (LED), and provides even illumination in normal and emergency operation. The power pack is a complete unit with battery charger and rechargeable battery. The battery is a maintenance-free, sealed Lead-Calcium. In case of AC power failure the equipment provides a minimum 30 minutes of emergency lighting.

READY-LITE RS SERIES ALL METAL PICTOGRAM EXIT SIGNS

The Ready-Lite RS Series pictogram Exit Signs operate with universal 2-wire AC input voltage and universal 2-wire DC input voltage. The sign is suitable for wall, end, or ceiling mount. The frame and back plate are both of one-piece steel construction. The faceplate(s) are constructed of robust clear polycarbonate panels with a border coloured factory white. The light source is white light-emitting diodes (LED), and provides even illumination in normal and emergency operation. The pictogram Exit Sign in a Self-powered configuration uses a sealed Nickel-Cadmium battery of 2.4V nominal voltage and stays illuminated during emergency operation for at least two hours upon AC failure.

READY-LITE RXL33 SERIES

The Thomas & Betts Ready-Lite RXL33 Series LED slim-profile Edge-Lit Exit Signs operate with universal two-wire AC input voltage and universal two-wire DC input voltage. The housing assembly is fabricated of extruded aluminum with a textured finish and colour. The canopy is made of die-cast aluminum and allows for ceiling, wall, or end mount installation. The light source is ten (10) long-life LED's installed on a PCB strip, with the acrylic panel having a curved contour. The legend has 6 high, 3/4 stroke red letters on a clear background, and is equipped with stick-on translucent directional indicators, to be installed in the field as required by the code. The Exit Sign in a Self-powered configuration is equipped with sealed Nickel-Cadmium batteries and will provide a minimum of 90 minutes of emergency illumination upon AC failure.

READY-LITE TUF-NM SERIES NEMA-4X CERTIFIED REMOTE LIGHTING FIXTURE

The Ready-Lite TUF-NM Series remote emergency lighting fixtures consist of either single or double lamp configurations according to the design. These fixtures are fully gasketed with a UV resistant and fire retardant polycarbonate back plate with a clear heavy-duty UV resistant polycarbonate lens. The unit is equipped with two emergency heads with tool-less adjustable swivels. Units are NEMA-4X and NSF certified and specifically designed for high abuse areas, wet and cold weather locations, food processing plants, as well in applications requiring a resistance to corrosive agents. The standard unit comes with stainless steel tamper-proof screws and bit.




Click on the Ready-Lite Catalog Above to Download

We also do Inspections and Installations. Give us a call to discuss your requirements.